|
 See
Level™ is the only complete center-drive and wheel gearbox lubrication
system. Invented and manufactured by Monty J. Teeter, the See Level™
saves time, money, and labor through an automatic oil-level management device
to address the problems of a contaminated or an exhausted gearbox oil supply.
With more than 25 years of center-pivot irrigation experience, Monty has
witnessed the market need for a center-drive and wheel gearbox lubrication
system—the patented See Level™ is the answer to these problems.
THE ONLY COMPLETE PIVOT CENTER DRIVE AND
GEARBOX LUBRICATION SYSTEM
Mission Statement of See Level™
To provide a solution for the pre-mature failure of
gearboxes.
Purpose of See Level™
-
to provide a reservoir of oil at a positive pressure to
all gearboxes
(approx. 3 quarts)
-
to provide a pressure relief to reduce excess pressure
on seals which causes leaks
(due to expansion of oil)
-
to provide a vacuum relief so moisture and dirt are not
sucked into the gearboxes via seals
(which will cause excessive wear on
shafts and seals)
-
to provide a transparent sight gauge to visually see
and check level of oil in all gearboxes at a simple glance or drive by
(if oil level is low, you know you have a potential problem and you can
address it before it fails)
-
to provide a single easy access fill port for oil
(not one located in a mud packed area)
-
to provide a sump to trap condensation from the
expansion and contraction of oil and easily drained by the sump drain
valve
(sump can trap up to 3" of water in bottom of chamber)
|
